Digital Cinema Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
GDC Server Certificate by Harshitkumar Thakker Started by Harshitkumar Thakker, 05-28-2020, 06:09 AM	55 responses 4,266 views 0 likes	Last Post by Leo Enticknap 10-01-2020, 11:07 AM
Light leaks on a Barco DP2K-20C by Mihkel Salk Started by Mihkel Salk, 09-28-2020, 05:11 AM	9 responses 399 views 0 likes	Last Post by Sean McKinnon 09-30-2020, 08:54 AM
Hocus Pocus DCP by Mark Strube Started by Mark Strube, 09-20-2020, 03:09 PM	16 responses 998 views 0 likes	Last Post by Marcel Birgelen 09-29-2020, 09:34 AM
Christie CP2210 Channel settings by Ian Garland Started by Ian Garland, 09-17-2020, 01:31 PM	10 responses 820 views 0 likes	Last Post by Marcel Birgelen 09-22-2020, 09:57 AM
Barco SP4K Firmware 1.2.3 released by Leo Enticknap Started by Leo Enticknap, 09-04-2020, 08:42 AM	6 responses 493 views 0 likes	Last Post by Steve Guttag 09-16-2020, 06:54 PM
Blu-ray from Spain -- convertible in MakeMKV / DCP-o-matic? by Mike Blakesley Started by Mike Blakesley, 09-10-2020, 11:41 AM	9 responses 433 views 0 likes	Last Post by Marcel Birgelen 09-12-2020, 04:18 PM
Christie CP2220 Integrated Motor Control Board stepper driver fried by Christian Hove Started by Christian Hove, 09-10-2020, 02:59 AM	8 responses 404 views 0 likes	Last Post by Christian Hove 09-11-2020, 04:03 AM
Christie Emergency start and reset buttons by Carsten Kurz Started by Carsten Kurz, 09-06-2020, 05:26 AM	6 responses 802 views 0 likes	Last Post by Marcel Birgelen 09-07-2020, 03:29 AM
Tenet DCP by Ian Puffenberger Started by Ian Puffenberger, 08-31-2020, 11:33 AM	27 responses 2,895 views 0 likes	Last Post by Mark Strube 09-05-2020, 02:51 PM
The Unfortunate State of Cinema in 2020: Tenet (an open letter to Cinemark) by Aaron Garman Started by Aaron Garman, 09-01-2020, 06:21 AM	1 response 636 views 0 likes	Last Post by Mark Gulbrandsen 09-01-2020, 07:19 AM

Previous 1 10 60 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 template Next

No topics found.

Mark This Channel Read

Announcement