Digital Cinema Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
4K surging in popularity and 7.1 audio decreasing? by Steve Guttag Started by Steve Guttag, 10-02-2020, 10:40 AM	7 responses 518 views 0 likes	Last Post by Greg Routenburg 10-05-2020, 09:06 AM
NEC NC-90MS01 Default Passwords? by Adam Towill Started by Adam Towill, 09-30-2020, 06:59 AM	3 responses 296 views 0 likes	Last Post by Carsten Kurz 10-01-2020, 03:07 PM
GDC Server Certificate by Harshitkumar Thakker Started by Harshitkumar Thakker, 05-28-2020, 06:09 AM	55 responses 4,102 views 0 likes	Last Post by Leo Enticknap 10-01-2020, 11:07 AM
Light leaks on a Barco DP2K-20C by Mihkel Salk Started by Mihkel Salk, 09-28-2020, 05:11 AM	9 responses 389 views 0 likes	Last Post by Sean McKinnon 09-30-2020, 08:54 AM
Hocus Pocus DCP by Mark Strube Started by Mark Strube, 09-20-2020, 03:09 PM	16 responses 962 views 0 likes	Last Post by Marcel Birgelen 09-29-2020, 09:34 AM
Christie CP2210 Channel settings by Ian Garland Started by Ian Garland, 09-17-2020, 01:31 PM	10 responses 775 views 0 likes	Last Post by Marcel Birgelen 09-22-2020, 09:57 AM
Barco SP4K Firmware 1.2.3 released by Leo Enticknap Started by Leo Enticknap, 09-04-2020, 08:42 AM	6 responses 487 views 0 likes	Last Post by Steve Guttag 09-16-2020, 06:54 PM
Blu-ray from Spain -- convertible in MakeMKV / DCP-o-matic? by Mike Blakesley Started by Mike Blakesley, 09-10-2020, 11:41 AM	9 responses 430 views 0 likes	Last Post by Marcel Birgelen 09-12-2020, 04:18 PM
Christie CP2220 Integrated Motor Control Board stepper driver fried by Christian Hove Started by Christian Hove, 09-10-2020, 02:59 AM	8 responses 393 views 0 likes	Last Post by Christian Hove 09-11-2020, 04:03 AM
Christie Emergency start and reset buttons by Carsten Kurz Started by Carsten Kurz, 09-06-2020, 05:26 AM	6 responses 738 views 0 likes	Last Post by Marcel Birgelen 09-07-2020, 03:29 AM

Previous 1 2 52 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 template Next

No topics found.

Mark This Channel Read

Announcement