Welcome to the new Film-Tech Forums!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Looking for a Gefen 12volt-7amp (80watt) DC power supply adapter that was supplied with the Gefen A/V Cinema Scaler Pro III. The output cord has a locking type screw collar connector. This scaler was made for and provided by Christie for Series1 digital cinema projector installations.
Thank you, Paul Finn .... prfinn (at) hotmail (dot) com
Tweet