Equipment and supplies WANTED

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Christie CP2000 by Kailai Nathan Started by Kailai Nathan, 09-10-2025, 03:20 AM	0 responses 65 views 0 likes	Last Post by Kailai Nathan 09-10-2025, 03:20 AM
Simplex XL Focus Assist by Gordon Lupien Started by Gordon Lupien, 09-07-2025, 12:24 AM	0 responses 71 views 0 likes	Last Post by Gordon Lupien 09-07-2025, 12:24 AM
Projector stand by Allan Barnes Started by Allan Barnes, 09-02-2025, 09:28 PM	0 responses 68 views 0 likes	Last Post by Allan Barnes 09-02-2025, 09:28 PM
Wanted: expired IMax Xenon liquid cooled lamps (intact) by Neal Strickberger Started by Neal Strickberger, 08-15-2025, 10:18 PM	0 responses 111 views 1 like	Last Post by Neal Strickberger 08-15-2025, 10:18 PM
Looking for Barco ICMP - Ours lost Certificate by Steve White Started by Steve White, 08-13-2025, 11:43 AM	0 responses 71 views 0 likes	Last Post by Steve White 08-13-2025, 11:43 AM
Need scope aperture plate for Shinkyo portable by Jay Schwartz Started by Jay Schwartz, 07-13-2025, 06:01 PM	0 responses 64 views 0 likes	Last Post by Jay Schwartz 07-13-2025, 06:01 PM
Western Electric 206A Flywheel by Jeffrey Pratt Started by Jeffrey Pratt, 07-12-2025, 11:58 AM	0 responses 43 views 0 likes	Last Post by Jeffrey Pratt 07-12-2025, 11:58 AM
Wanted - USED CP2220 or NEC NC1000 or NEC NC 1202. by Tissan Dazilva Started by Tissan Dazilva, 06-28-2025, 09:13 AM	0 responses 86 views 0 likes	Last Post by Tissan Dazilva 06-28-2025, 09:13 AM
Test films wanted for a chain alignment by Frank Raia Started by Frank Raia, 06-27-2025, 07:37 AM	0 responses 63 views 1 like	Last Post by Frank Raia 06-27-2025, 07:37 AM
Machine Prevost P93 - manual and the electrical diagram by Luís Lopes Started by Luís Lopes, 05-22-2025, 03:01 PM	0 responses 70 views 0 likes	Last Post by Luís Lopes 05-22-2025, 03:01 PM

Previous 1 2 3 4 5 6 7 8 9 10 11 27 template Next

No topics found.

Mark This Channel Read

Announcement

Equipment and supplies WANTED