Film Handler's Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
B-Chain microphone issue by Neal Scanlan Started by Neal Scanlan, Today, 10:04 AM	3 responses 55 views 0 likes	Last Post by Marco Giustini Today, 05:18 PM
Projectable? Where do you draw the line? by Ryan Gallagher Started by Ryan Gallagher, Yesterday, 12:28 PM	6 responses 130 views 0 likes	Last Post by Ryan Gallagher Today, 08:35 AM
Reel to reel question by Frank Raia Started by Frank Raia, Yesterday, 08:16 AM	14 responses 148 views 0 likes	Last Post by Frank Raia Today, 05:27 AM
XD10 ON/OFF behaviour by Marco Giustini Started by Marco Giustini, 07-08-2025, 06:01 AM	22 responses 289 views 0 likes	Last Post by Ryan Gallagher Yesterday, 11:59 AM
16mm Bauer Selecton - Oil bath type? by Benjamin Olsen Started by Benjamin Olsen, 07-16-2025, 06:24 PM	0 responses 50 views 0 likes	Last Post by Benjamin Olsen 07-16-2025, 06:24 PM
Dolby Stereo "A" Screening Issue by Ryan Gallagher Started by Ryan Gallagher, 07-12-2025, 07:59 AM	19 responses 327 views 1 like	Last Post by Josh Jones 07-16-2025, 09:54 AM
Looking to learn about film leaders by Michael Bach Started by Michael Bach, 01-13-2022, 01:27 AM	24 responses 885 views 1 like	Last Post by Steve Guttag 07-15-2025, 05:09 AM
Timing Motor Ramp-Ups for Accurate Leader Start Frame by Ryan Gallagher Started by Ryan Gallagher, 07-10-2025, 11:19 AM	17 responses 263 views 0 likes	Last Post by Ryan Gallagher 07-14-2025, 10:51 PM
Reel Arm Bells on 5in cores vs 8in cores? by Ryan Gallagher Started by Ryan Gallagher, 07-02-2025, 11:35 PM	22 responses 306 views 0 likes	Last Post by Ryan Gallagher 07-14-2025, 10:44 PM
SR separation by Frank Raia Started by Frank Raia, 06-26-2025, 06:22 PM	35 responses 602 views 0 likes	Last Post by Marco Giustini 07-13-2025, 05:05 PM

Previous 1 2 3 4 5 6 7 8 9 10 11 51 template Next

No topics found.

Mark This Channel Read

Announcement