Film Handler's Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Recoating a reflector by Phil Ranucci Started by Phil Ranucci, 10-19-2024, 12:45 PM	5 responses 215 views 1 like	Last Post by Phil Ranucci 10-21-2024, 01:29 PM
Adjusting Kelmar Take-Up Clutches by Jim Cassedy Started by Jim Cassedy, 10-11-2024, 06:11 AM	15 responses 294 views 0 likes	Last Post by Steve Guttag 10-18-2024, 06:26 PM
Altec Lansing Voice of the Theater cabinets and speakers Identification by Bill Seipel Started by Bill Seipel, 10-11-2024, 09:41 AM	18 responses 567 views 1 like	Last Post by Mark Gulbrandsen 10-18-2024, 09:40 AM
IREM EX-170 switching rectifier v/s traditional IREM N3 etc. by Jerry G. Axelsson Started by Jerry G. Axelsson, 10-11-2024, 01:40 AM	2 responses 158 views 0 likes	Last Post by Jerry G. Axelsson 10-14-2024, 01:30 AM
Kinoton FP38 water cooling by Neal Scanlan Started by Neal Scanlan, 10-10-2024, 06:32 AM	3 responses 179 views 0 likes	Last Post by Steve Guttag 10-10-2024, 05:10 PM
Eiki NT2 sound issue by Jonathan Wood Started by Jonathan Wood, 10-07-2024, 03:04 PM	2 responses 133 views 0 likes	Last Post by Juergen Kellermann 10-08-2024, 04:31 PM
Century JJ Studio Guide Screws by Ryan Gallagher Started by Ryan Gallagher, 10-04-2024, 11:49 AM	9 responses 217 views 0 likes	Last Post by Ryan Gallagher 10-07-2024, 04:59 PM
JJ Lower Pad Roller Assembly (removal for a stuck one) by Ryan Gallagher Started by Ryan Gallagher, 09-25-2024, 10:09 AM	22 responses 372 views 0 likes	Last Post by Ryan Gallagher 10-04-2024, 05:18 PM
16mm Fumeo HL2000 by Rob Clarke Tucker Started by Rob Clarke Tucker, 09-22-2024, 06:22 PM	35 responses 499 views 0 likes	Last Post by Rich Haddard 10-03-2024, 06:18 PM
Using Brenkert Enarc with DP70? by Mathew Bailey Started by Mathew Bailey, 10-01-2024, 07:38 PM	6 responses 155 views 0 likes	Last Post by Mark Gulbrandsen 10-03-2024, 07:37 AM

Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 48 template Next

No topics found.

Mark This Channel Read

Announcement