IP address for DSP100

[Kailai Nathan]

Dear Colleague,

Could someone please direct me where to locate the IP address for the DSP100. Thanks

[Jose Angel Velasco]

On the DSP-100 display, go to the 3 circles tab, go down to auditorium, and press enter.
For change the ip address, push and maintain the enter key when power on the DSP-100 until the ip configuration screen appears.

[Leo Enticknap]

Though from an admittedly dim and hazy memory, doing that will break communication between the DSS100 and the DSP100, and stop playback.

Why would you need to change the address of the DSP? The DSS is the only thing that needs to be able to communicate with it via IP, and all transport commands, communication with a TMS, etc., happens via the DSS.

[Kailai Nathan]

Thanks Leo. At present the message on the DSP screen is "error securing connection to projector'. It seems something not right between DSP and the projector. Is there a need to connect the projector powered up? Thanks

[Marco Giustini]

I'm not a mod but there is no need to ask the same question on multiple threads, it only adds confusion to the board.