JSD-60 IP Setup Issues

[Rick Cohen]

The JSD-60 manual requires a USB connection going to the front of the processor for updating the IP settings. I am currently able to communicate with the unit using TCP/IP through the JSD-60 software program, but that doesn't allow the IP address to be changed.

When I attempt to connect using my USB cable, my laptop won't recognize any devices to connect to. I am running Windows 11. I didn't have these connection issues via USB cable with my previous Windows versions, so I'm thinking that may be the issue here.

Has anyone else experienced problems connecting with a JSD-60 using the USB cable to the front of the unit? Any suggestions for getting the USB communication to work?

[Marco Giustini]

Do you hear the "USB plugged in" sound when plugging into the JSD? If you do, then it's a driver issue. If you don't, then it could be anything.

- Check your laptop USB port works by connecting to something else
- if that is positive, you might want to try another USB cable on the JSD
- Does the USB port feel loose somehow?
- I believe the front panel is connected to the motherboard via a flexible cable which I think can cause issues. You can try re-seating it, maybe cleaning the contacts with some contact cleaner?