Hdmi input doesn't work on IMS3000

[Andrea Arcuri]

I say confirm both methods of ALT are not working. If SDI is still working maybe you just switch to using that if you can't afford the repair charge right now.

I asked the local asssistance to check cause they have it. In that case I'll buy a converter.
thanks

[Andrea Arcuri]

Anyone knows if the sdi if IMS3000 is audio and video?

[Ryan Gallagher]

Anyone knows if the sdi if IMS3000 is audio and video?

It appears yes to SDI Audio.

Page 89, Section 16.3 of the Issue 4 version of the IMS3000 Manual. (not sure what the latest manual is)
https://kinotehnik.net/wp-content/up...al_issue_4.pdf

[Jesper Meng]

You need to set up a live signal in settings for both sdi and hdmi inputs to work. And yes, audio feeds through to your processor, if your ims is without audio processor.

[Andrea Arcuri]

You need to set up a live signal in settings for both sdi and hdmi inputs to work. And yes, audio feeds through to your processor, if your ims is without audio processor.

I have tried and Sdi works but not audio passthrough like Hdmi. I need to split signal and bring audio directly to the cp950?

[Jesper Meng]

Actually you can route hdmi through cp950

[Andrea Arcuri]

Actually you can route hdmi through cp950

the problem is that I need to pass video and audio through sdi on ims3000. usually when I connect hdmi audio passthrough directly to cp950 through audio exit on ims3000 but with Sdi no audio arrives to cp950