DTS XD-10 : Won't Power UP

[Jim Cassedy]

Oh no! My DTS XD-10 is DEAD. It won't power up. It was fine the last time we ran
70mm BRUTALIST, and has been turned off ever since.
> Yes, I know there's another power switch on the back of the unit.
> Both rocker-type power switches 'feel normal', like they are working properly.
> I pulled the AC power cable off of another piece of equipment that was working,
and plugged it into the back of the XD10. . . still no power.

DOES ANYONE KNOW IF THERE ARE ANY FUSES INSIDE? I'm running
two events in the building and haven't had a chance to check the manual yet.

[Ryan Gallagher]

Not any fuses per se, but it is a regular PC type power supply, there might be fuses in there.

I would unplug the supply cables and see if shorting the power pins on the large molex connector turns it on as expected. If not order a replacement while investigating.

[Jim Cassedy]

Yes, I noticed from the back that where the power cord plugs in that it looks like a
regular PC type supply. Unfortunately, I'm already tied up doing two other events
tonight which will totally monopolize my attention. I think they may get our service
tech in here because I'm too 'overbooked' between now and Wednesday, so,
much to my frustration, I have no time to troubleshoot/repair.
( My company is too damn cheap to pay two union projectionists, so I'm all they've got)