Film-Tech Cinema Systems

UC IRVINE HIB 100 SCREENING ROOM
Irvine, California

Dubber encoders mounted in the FP-38Dís. I fabricated the bracket and with the help of a local machinist made a jig to get the encoder pulleys mounted to the original motor pulleys. Encoders feed at 10 pulse/frame. Note the gigantic sprocket on the take-ups ... these are "standard" frictions, not the accelerated frictions I really need to get a tight wind on standard reels or cores.

August 2010 photo from the Tony Bandiera Jr collection.

© 1999-2018 Film-Tech Cinema Systems, LLC. All rights reserved.
www.film-tech.com :: 1.69 :: 2.31