Digital Cinema Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Q-SYS Corner by Steve Guttag Started by Steve Guttag, 01-02-2020, 04:22 PM	91 responses 4,154 views 3 likes	Last Post by Steve Guttag Yesterday, 10:38 AM
GDC Server Certificate by Harshitkumar Thakker Started by Harshitkumar Thakker, 05-28-2020, 06:09 AM	43 responses 1,507 views 0 likes	Last Post by Steve Guttag 09-25-2020, 12:24 PM
Hocus Pocus DCP by Mark Strube Started by Mark Strube, 09-20-2020, 03:09 PM	8 responses 396 views 0 likes	Last Post by Mike Babb 09-24-2020, 04:05 AM
Christie CP2210 Channel settings by Ian Garland Started by Ian Garland, 09-17-2020, 01:31 PM	10 responses 286 views 0 likes	Last Post by Marcel Birgelen 09-22-2020, 09:57 AM
CP750 level drop disease by Dave Macaulay Started by Dave Macaulay, 08-08-2020, 07:19 AM	49 responses 2,036 views 0 likes	Last Post by Leo Enticknap 09-20-2020, 08:14 AM
Nec NC1200C LAN control by Julien Favier Started by Julien Favier, 09-16-2020, 09:26 PM	6 responses 147 views 0 likes	Last Post by Julien Favier 09-17-2020, 12:36 PM
Barco SP4K Firmware 1.2.3 released by Leo Enticknap Started by Leo Enticknap, 09-04-2020, 08:42 AM	6 responses 304 views 0 likes	Last Post by Steve Guttag 09-16-2020, 06:54 PM
Blu-ray from Spain -- convertible in MakeMKV / DCP-o-matic? by Mike Blakesley Started by Mike Blakesley, 09-10-2020, 11:41 AM	9 responses 308 views 0 likes	Last Post by Marcel Birgelen 09-12-2020, 04:18 PM
DMA8+ to Odyssey DI6-3 DB25 pinouts by Leo Enticknap Started by Leo Enticknap, 08-25-2020, 10:04 AM	10 responses 441 views 0 likes	Last Post by Leo Enticknap 09-12-2020, 01:45 PM
Christie CP2220 Integrated Motor Control Board stepper driver fried by Christian Hove Started by Christian Hove, 09-10-2020, 02:59 AM	8 responses 238 views 0 likes	Last Post by Christian Hove 09-11-2020, 04:03 AM

Previous 1 2 3 4 5 6 7 8 9 10 11 12 template Next

No topics found.

Mark This Channel Read

Announcement