Tweet
Request: Automatic Devices Masking Motor Manual?
Does anyone happen to have a manual for a masking motor made by AUTOMATIC DEVICES
COMPANY, of Allentown PA? They're still in business, but at least several attempts to contact
them by e-mail by both myself and someone at another venue have not elicited any response.
(and 'no', the manual is not available on their website, unless you register, which I've tried to do)
I've got both horizontal and vertical movable masking, and I'd like to add a few more presets,
and also slightly 'tweak' a few of the existing ones. More info below:
TODAY's FUN FOTOS:
I Squeezed Backstage With A Flashlight To Get Some Pix:
MaskMtr_1.jpg
The Preset Stop Programming & Control Keypads On Top Of The Unit
MaskMtr_2.jpg
(Oh, so THATS where I left my glasses- - I've been looking all over for them!)
The MODEL NUMBER I'VE GOT IS A :"1003-LSI"
(I believe the "1003" refers to the actual masking machine, and the "LSI" refers to
what they call a "LogiStop" modification which adds a digital shaft encoder for precision
positioning, and a 20 preset memory & also the ability for DMX and/or RS-232 control)
There is a farily simple programming explanation in their online products catalog, but I'd really
like to have more detailed instructions before I start mucking around with it)
MaskingMot_3.jpg
This system was probably installed around 2014/15
Jim C
COMPANY, of Allentown PA? They're still in business, but at least several attempts to contact
them by e-mail by both myself and someone at another venue have not elicited any response.
(and 'no', the manual is not available on their website, unless you register, which I've tried to do)
I've got both horizontal and vertical movable masking, and I'd like to add a few more presets,
and also slightly 'tweak' a few of the existing ones. More info below:
TODAY's FUN FOTOS:
I Squeezed Backstage With A Flashlight To Get Some Pix:
MaskMtr_1.jpg
The Preset Stop Programming & Control Keypads On Top Of The Unit
MaskMtr_2.jpg
(Oh, so THATS where I left my glasses- - I've been looking all over for them!)
The MODEL NUMBER I'VE GOT IS A :"1003-LSI"
(I believe the "1003" refers to the actual masking machine, and the "LSI" refers to
what they call a "LogiStop" modification which adds a digital shaft encoder for precision
positioning, and a 20 preset memory & also the ability for DMX and/or RS-232 control)
There is a farily simple programming explanation in their online products catalog, but I'd really
like to have more detailed instructions before I start mucking around with it)
MaskingMot_3.jpg
This system was probably installed around 2014/15
Jim C