Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Community   » Film-Yak   » Difference Between DVD-R and DVD+R

   
Author Topic: Difference Between DVD-R and DVD+R
Richard Greco
Phenomenal Film Handler

Posts: 1180
From: Plant City, FL
Registered: Nov 2003


 - posted 03-31-2004 06:47 AM      Profile for Richard Greco   Email Richard Greco   Send New Private Message       Edit/Delete Post 
What's the difference between DVD-R and DVD+R?

 |  IP: Logged

Leo Enticknap
Film God

Posts: 7474
From: Loma Linda, CA
Registered: Jul 2000


 - posted 03-31-2004 07:48 AM      Profile for Leo Enticknap   Author's Homepage   Email Leo Enticknap   Send New Private Message       Edit/Delete Post 
AFAIK, absolutely nothing except a code pre-written onto each disc to signify that it is one or the other, thereby making one guy's disc incompatible with the other guy's player in order to force you to buy the hardware manufacturer's approved media. There can't be any significant difference, because you can now get drives which will write both.

 |  IP: Logged

Daryl C. W. O'Shea
Film God

Posts: 3977
From: Midland Ontario Canada (where Panavision & IMAX lenses come from)
Registered: Jun 2002


 - posted 03-31-2004 07:59 AM      Profile for Daryl C. W. O'Shea   Author's Homepage   Email Daryl C. W. O'Shea   Send New Private Message       Edit/Delete Post 
DVD+R supports dual layer burning if you can get your hands on hardware & firmware to make it happen.

DVD-R/RW is supported by the DVD Forum, DVD+R/RW is not (yet).

Last I checked, approximately 91% of DVD players support DVD-R, while 84% support DVD+R.

 |  IP: Logged

Stephen Furley
Film God

Posts: 3059
From: Coulsdon, Croydon, England
Registered: May 2002


 - posted 03-31-2004 08:05 AM      Profile for Stephen Furley   Email Stephen Furley   Send New Private Message       Edit/Delete Post 
There's a bit more to it than that, but I can't remember the exact details, and which is which. The differences are fairly minor, but enough to make the two formats incompatible for writing, unless the writer is specifically designed to handle both. Why on Earth couldn't they have resolved these differences, and produced a single standard before they reached the market.

To make things worse, there are two versions of DVD-RAM, the original one with 2.6GB. per side, and the later one at 4.7GB. There are also two versions of DVD-R, for Authoring and for General, though the former is much more expensive, and little used now. There was also an early version of the authoring type which had a smaller capacity, 3.something GB. I think, and one version each of DVD-RW, DVD+R and DVD+RW. A total of eight formats.

www.dvdmystified.com has details of the differences.

 |  IP: Logged

Daryl C. W. O'Shea
Film God

Posts: 3977
From: Midland Ontario Canada (where Panavision & IMAX lenses come from)
Registered: Jun 2002


 - posted 03-31-2004 08:16 AM      Profile for Daryl C. W. O'Shea   Author's Homepage   Email Daryl C. W. O'Shea   Send New Private Message       Edit/Delete Post 
DVD R supports lossless linking and both CAV (Constant Angular Velocity) and CLV (Constant Linear Velocity) writing.

DVD-R only supports CLV.

DVD-RAM (an entirely useless format) uses zoned CLV, similar to a hard disk.

General DVD-R discs are encoded to prevent writing CSS encoded material, Authoring discs aren't.

DVD R also supports more funky laser controls.

It's all pretty much useless information though... just go buy yourself a Pioneer A07 and you'll be happy. Even if you're not looking to buy a drive.

 |  IP: Logged

Richard Greco
Phenomenal Film Handler

Posts: 1180
From: Plant City, FL
Registered: Nov 2003


 - posted 03-31-2004 11:38 AM      Profile for Richard Greco   Email Richard Greco   Send New Private Message       Edit/Delete Post 
Thanks For The Info

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.