Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Digital Cinema Forum   » NEC NC1200C Service door remarriage (Tamper error)

   
Author Topic: NEC NC1200C Service door remarriage (Tamper error)
Ben Hodson
Film Handler

Posts: 5
From: Connah's Quay, Flintshire, UK
Registered: Jan 2019


 - posted 02-05-2019 06:56 AM      Profile for Ben Hodson   Email Ben Hodson   Send New Private Message       Edit/Delete Post 
How do I go about remarrying the service doors on my NC1200C? Have read about 1111 when logged into service mode but nowhere asks me to log in.

Thanks in advance

 |  IP: Logged

Mark Gulbrandsen
Resident Trollmaster

Posts: 16657
From: Music City
Registered: Jun 99


 - posted 02-05-2019 08:56 AM      Profile for Mark Gulbrandsen   Email Mark Gulbrandsen   Send New Private Message       Edit/Delete Post 
Logging into service mode resets the service door after you changed a lamp or pulled the sides off for some reason. If you need to remarry and have a legacy input module then that is done in "Setup" in DCC. If you have an IMB server that has to be remarried because you pulled it out, then that is normally done in the IMB Servers firmware.

Mark

 |  IP: Logged

Leo Enticknap
Film God

Posts: 7474
From: Loma Linda, CA
Registered: Jul 2000


 - posted 02-05-2019 09:32 AM      Profile for Leo Enticknap   Author's Homepage   Email Leo Enticknap   Send New Private Message       Edit/Delete Post 
Per this site's rules, we are not supposed to post login credentials here.

As Mark points out, there are actually multiple separate security clear procedures you need to do: one for the projector itself, and the other for the IMB/IMS, and/or Enigma card (three procedures if you have both option slots in use, and have both and IMB/IMS and an Enigma).

If you email cinema.support [at] necdisplay.com, and tell them what make and model of IMB or IMS you're using, and if you have an Enigma card or not, I'm sure that they'll be able to give you the information that you need.

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.