Film-Tech Cinema Systems
Film-Tech Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum   » Operations   » Digital Cinema Forum   » CP650 and CP750 power connection

   
Author Topic: CP650 and CP750 power connection
Mike Moreno
Expert Film Handler

Posts: 184
From: culiacan sinaloa mexico
Registered: Jul 2008


 - posted 06-18-2014 02:44 PM      Profile for Mike Moreno   Author's Homepage   Email Mike Moreno   Send New Private Message       Edit/Delete Post 
Hello guys.

i have just install a few 220V UPS in a couple of BARCO projectors, they just have 220V output on wich I only connect the GDC PSD and of course the electronics from the equipment but i wonder if i can plug also a CP650 or CP750 in to this UPS.
i read on the back of the procesors 120-240V but i just wanna make sure that they really can work at 220Vac. right now they are working at 120Vac.
thanks for your help.

mike Moreno
Mexico

 |  IP: Logged

Sam D. Chavez
Film God

Posts: 2086
From: Martinez, CA USA
Registered: Aug 2003


 - posted 06-18-2014 05:59 PM      Profile for Sam D. Chavez   Author's Homepage     Send New Private Message       Edit/Delete Post 
There is a 110/220 switch on the top of the 650 but it has only to do with the bypass power. The bypass fuse inside should be changed to the correct value but the 650 will detect and run fine on 220 even if you do not change the fuse.

750 also senses 110 or 220 and runs fine.

 |  IP: Logged

Mike Moreno
Expert Film Handler

Posts: 184
From: culiacan sinaloa mexico
Registered: Jul 2008


 - posted 06-21-2014 02:12 PM      Profile for Mike Moreno   Author's Homepage   Email Mike Moreno   Send New Private Message       Edit/Delete Post 
thanks a lot Sam [thumbsup]

 |  IP: Logged



All times are Central (GMT -6:00)  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2018 Film-Tech Cinema Systems, LLC. All rights reserved.