Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Digital Cinema Forum   » cp2220 icpp error

   
Author Topic: cp2220 icpp error
Sanish Prabhakaran
Film Handler

Posts: 8
From: matar qadeem doha ,qatar
Registered: Feb 2011


 - posted 01-26-2012 06:38 PM      Profile for Sanish Prabhakaran   Author's Homepage   Email Sanish Prabhakaran   Send New Private Message       Edit/Delete Post 
anybody can help me to solve problem in cp2220 showing error icptest fail.while playing showing bluish colour in the screen

 |  IP: Logged

Steve Guttag
We forgot the crackers Gromit!!!

Posts: 12814
From: Annapolis, MD
Registered: Dec 1999


 - posted 01-26-2012 08:35 PM      Profile for Steve Guttag   Email Steve Guttag   Send New Private Message       Edit/Delete Post 
If your ICP is running firmware 2.x.x...then your ICP is failing and needs to have the Christie ICP recovery package run. Then again, you may just have an ICP failure. Any DLP projector made in 2010 will have its ICP fail sooner or later.

-Steve

 |  IP: Logged

Sanish Prabhakaran
Film Handler

Posts: 8
From: matar qadeem doha ,qatar
Registered: Feb 2011


 - posted 01-30-2012 01:53 PM      Profile for Sanish Prabhakaran   Author's Homepage   Email Sanish Prabhakaran   Send New Private Message       Edit/Delete Post 
THANKS STEAVE,
I HAVE 2 BARCODP2000 AND ONE CP2000ZX,SO YOU MEAN TO SAY SOON PROBLEM WILL REACH THAT PROJECOTORS ALSO?THERE ANY THING I CAN DO PREVENT THIS,UPDATING FIRMWARE WILL BE HELPFUL OR CAN YOU ADVICE ME SOMETHING TO RECOVER THIS.

 |  IP: Logged

Steve Guttag
We forgot the crackers Gromit!!!

Posts: 12814
From: Annapolis, MD
Registered: Dec 1999


 - posted 01-30-2012 09:36 PM      Profile for Steve Guttag   Email Steve Guttag   Send New Private Message       Edit/Delete Post 
The DP2000 and the CP2000ZX are series 1 projectors...they don't have the ICP so you need not worry about board corruption with them.

The ICP corruption issue is limited to Series 2 projectors made in 2010. By 2011, the ICP had advanced to version 3.0.314 and beyond. ICPs that start with version 3.x.x and beyond will not go corrupt. Those that start with version 2.x.x will...unless a recovery procedure is run that essentially reformats the board from scratch, which will wipe the corruption problem out. Please note, the procedures for this must be followed to the letter that are specific to each projector brand.

-Steve

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.