Film-Tech Cinema Systems
Film-Tech Forum

Post New Topic  Post A Reply
my profile | my password | register | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum   » Operations   » Digital Cinema Forum   » Nec Nc1600c

Author Topic: Nec Nc1600c
Greg LeMaster
Film Handler

Posts: 1
From: Gatlinburg, TN, Sevier
Registered: May 2010

 - posted 06-13-2010 05:19 PM      Profile for Greg LeMaster   Email Greg LeMaster   Send New Private Message       Edit/Delete Post 
Does anyone know where I can download a copy of
Nec's Digital Cinema Connector
I have looked all over their site.
We have a new one and need to reset bulb hours.

 |  IP: Logged

Monte L Fullmer
Film God

Posts: 8359
From: Nampa, Idaho, USA
Registered: Nov 2004

 - posted 06-13-2010 06:13 PM      Profile for Monte L Fullmer   Email Monte L Fullmer   Send New Private Message       Edit/Delete Post 
You're not going to find one on the interent since NEC's rather have field techs do the bulb training on installs.

But, you can reset bulb hours right there on the display panel using the touchpad.

1-Have the thing in "Standby" mode.
2-(what I do is open the rear door to 'fool' the system that a bulb change is completed, then, close the rear door to continue, otherwise, you won't be able to get into the section of this since it will be locked out for usage).

3- Go to "Installation", then "New bulb" and you can find the areas were it will ask you if you want to reset the hours.

good luck - Monte

 |  IP: Logged

All times are Central (GMT -6:00)  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Powered by Infopop Corporation

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2018 Film-Tech Cinema Systems, LLC. All rights reserved.