Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Digital Cinema Forum   » 2000ZX problem

   
Author Topic: 2000ZX problem
David Stone
Film Handler

Posts: 75
From: Hornsby, Sydney, Australia
Registered: Jun 2008


 - posted 03-16-2010 07:05 PM      Profile for David Stone   Email David Stone   Send New Private Message       Edit/Delete Post 
Hi Guys,

Every now and then a 2 foot green line will appear down the right hand side of the screen from top to bottom You can fix it by simply changing channels. Any suggestions on the cause.

Cheers,

David

 |  IP: Logged

Joe Elliott
Master Film Handler

Posts: 497
From: Port Orange, Fl USA
Registered: Oct 2006


 - posted 03-17-2010 12:21 AM      Profile for Joe Elliott   Email Joe Elliott   Send New Private Message       Edit/Delete Post 
We had a similar problem with our barco. We were told it was a timing problem when previews, or other clips were not the same format, and a software upgrade fixed it. Check that your projector has the current software. May be your problem, may not, but it wouldn't hurt.

 |  IP: Logged

Alastair Comrie
Film Handler

Posts: 28
From: Auckland, New Zealand
Registered: May 2007


 - posted 03-17-2010 05:48 PM      Profile for Alastair Comrie   Email Alastair Comrie   Send New Private Message       Edit/Delete Post 
We had an annoying green flicker with our Christie, however changing channels didn't do anything. A software upgrade was necessary to fix it.

 |  IP: Logged

Michael Hossen
Expert Film Handler

Posts: 136
From: Perth, Australia
Registered: Apr 2007


 - posted 03-21-2010 05:59 AM      Profile for Michael Hossen   Author's Homepage   Email Michael Hossen   Send New Private Message       Edit/Delete Post 
We're having a green flicker problem with a NEC NC2000C. When changing between trailers. I'm assuming it needs a firmware update.

 |  IP: Logged

Steven C Y Chan
Film Handler

Posts: 16
From: Hong Kong, HKSAR
Registered: Jan 2005


 - posted 03-22-2010 02:55 AM      Profile for Steven C Y Chan   Author's Homepage   Email Steven C Y Chan   Send New Private Message       Edit/Delete Post 
Have you check the error count from the 2 HD-SDI? cases here solve by change TI-Board [Smile] , some cause by a bad cable. [Frown]

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.