Film-Tech Forum ARCHIVE: Strong 6200000 Series V2

my profile | my password | search | faq & rules | forum home

»	Film-Tech Forum ARCHIVE » Operations » Film Handlers' Forum » Strong 6200000 Series V2

Author

Topic: Strong 6200000 Series V2

David Kankainen
Film Handler

Posts: 1
From: Guelph, Ontario, Canada
Registered: Feb 2016

posted 03-17-2016 05:33 PM

I have this power supply, Single phase rated at 20-30 volts,and
25-95 amps. I have tested it by putting jumper between #2 and 5,
and another jumper between 4 and 6. The green go lamp lights up,
and there is close to 200v DC measured at the output lugs.
I also have Ballantyne DC igniter 1-7K Part No 39862000. It would appear that the Large lugs would go in series with the Xenon lamp,
but there is no polarity markings on the igniter lugs.
Note this will power a search light.
Any insight in this whold be greatly appreciated.

Thanks Dave [Smile]

| IP: Logged

All times are Central (GMT -6:00)

Printer-friendly view of this topic

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.