Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Film Handlers' Forum   » intermittent electrical discharge/interference sound in speakers

   
Author Topic: intermittent electrical discharge/interference sound in speakers
James Larden
Film Handler

Posts: 14
From: Montreal, QC, CA
Registered: Jan 2010


 - posted 02-09-2011 07:59 PM      Profile for James Larden   Author's Homepage   Email James Larden   Send New Private Message       Edit/Delete Post 
Hi All,

I was wondering if I could get some help with this issue.

Two days ago in our main theater on campus we had a overwhelming noise come from the stage ch. speakers. I can only describe it as akin to hearing lamp strike in a poorly grounded system, but it was sustained for about 30 seconds and much louder. I immediately turned off all the amps, but the sound persisted. I couldn't pinpoint it because it was so loud and aggressive, and about 5-10 seconds after I entered the cinema it cut out. Yesterday morning it happened again, lasting about 10-15 seconds before the morning film studies class began. Just now it happened again this time it was only on the surround speakers.

I thought that it might be inductance from some nearby lighting dimmers which have been causing us some trouble, but the phenomenon appears at random and not when the dimmers are turned off and on. I called our service tech and he said our CP-55 volume control can short out, and the pot can go to max with all lose of control. But the system was not passing audio at a loud volume, just the noise and the amps were off. I thought that we might have a faulty amp that is passing DC, but I am not sure.

here is the gear:

Oppo BDP-93 BR deck (coaxial s/pdif out)
Cambridge Audio P2000 pre-amp (6 ch. analog out)
CP-55

L,C,R amps Bryston 3B
Surround and Sub amps QSC USA 900

screen ch. speakers EV 5045/DH16?
sub JBL 4647
sur. JBL 8330

 |  IP: Logged

Louis Bornwasser
Film God

Posts: 4441
From: prospect ky usa
Registered: Mar 2005


 - posted 02-09-2011 08:29 PM      Profile for Louis Bornwasser   Author's Homepage   Email Louis Bornwasser   Send New Private Message       Edit/Delete Post 
I don't think the EV's can take much loud hash.

With the amps OFF, I cannot see how you have any sound. Louis

 |  IP: Logged

Tony Bandiera Jr
Film God

Posts: 3067
From: Moreland Idaho
Registered: Apr 2004


 - posted 02-10-2011 12:28 PM      Profile for Tony Bandiera Jr   Email Tony Bandiera Jr   Send New Private Message       Edit/Delete Post 
I agree with Louis..if the amps were off there is no way the speakers were creating the noise.

What I suspect is that you need to get an electrician in there IMMEDIATELY to look for signs of an arc fault in either some equipment, light fixtures, dimmer rack, junction boxes or conduits. Do it NOW before the fire.

DO NOT let them take this casually...it may take a lot of time and effort but I guarantee they WILL find something damaged by an electrical arc fault!

 |  IP: Logged

Gordon McLeod
Film God

Posts: 9532
From: Toronto Ontario Canada
Registered: Jun 99


 - posted 02-10-2011 02:31 PM      Profile for Gordon McLeod   Email Gordon McLeod   Send New Private Message       Edit/Delete Post 
Bryston power switchs have been known to fail and the amps still powered up when the switch is in the off position

 |  IP: Logged

Sam D. Chavez
Film God

Posts: 2153
From: Martinez, CA USA
Registered: Aug 2003


 - posted 02-10-2011 05:43 PM      Profile for Sam D. Chavez   Author's Homepage     Send New Private Message       Edit/Delete Post 
Maybe cell phone interference.

 |  IP: Logged

Dave Macaulay
Film God

Posts: 2321
From: Toronto, Canada
Registered: Apr 2001


 - posted 02-12-2011 06:29 PM      Profile for Dave Macaulay   Email Dave Macaulay   Send New Private Message       Edit/Delete Post 
An amp may store energy in capacitors and work for some time after powerdown, but even Bryeton amps can't make "loud" sound from a loudspeaker for more than a couple of seconds with no AC power. The load power with high signal will suck the caps down immediately.
So what's up? Is the sound actually from the speakers? Do the power switches not work? Maybe someone is hammer drilling some holes to mount new equipmeny nearby? From too much experience listening to seat guys hammer drill a few thousand holes while I'm trying to install projectors, the sound goes a long way.

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.