Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Film Handlers' Forum   » Strong 62-80005R power supply mainborad problem

   
Author Topic: Strong 62-80005R power supply mainborad problem
Marin Zorica
Jedi Master Film Handler

Posts: 671
From: Biograd na Moru, Croatia
Registered: May 2003


 - posted 02-02-2010 06:57 PM      Profile for Marin Zorica   Email Marin Zorica   Send New Private Message       Edit/Delete Post 
I have one of this, and problem was that small rectifier which is consisted from transformer and two diode stabilizer was dead, stabilizer NPN darlington was dead because of one shorted tantal cap....both were replaced and when I powered it again it was working, 150V no load, after half of minute or so, voltage begin to fall down....when I powered it again it was as before, no power on output, even contactor is working, DC voltage to mainboard is 310V DC and so....

But now when is no working I did mesured that voltage that powers IC's on mainboard is 7V DC, as I don't have schematic of mainbord can anybody confirm me this is wright value, or it should be higher? Also, now I found when measuring resistance between GND and Vcc of is'c that I have only 10OHm.....that's kind low I think? When cap was dead it was 0, but now is 10...maybe some other cap is dead too...

If anybody can provide me schematic of main board it would be great, or give me some tips about voltages there.

Will pull out mainboard again and start to search...

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.