Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Film Handlers' Forum   » Cp 45 and Cat 515 question

   
Author Topic: Cp 45 and Cat 515 question
Bernie Anderson Jr
Master Film Handler

Posts: 435
From: Woodbridge, New Jersey
Registered: Apr 2000


 - posted 10-16-2007 10:07 AM      Profile for Bernie Anderson Jr   Author's Homepage   Email Bernie Anderson Jr   Send New Private Message       Edit/Delete Post 
I'm working with a CP 45 with the Cat 515 installed for split surround. When I generate pink noise through the 45 the right channel is alot lower than the left. I can't find any data about the Cat 515, but is the trim pot on that 515 card the output for the right channel? There's only one trim pot on the 511 board which would control the output for the mono surround. I haven't played with it, trying to find info first.

Thanks
Bernie

 |  IP: Logged

Christos Mitsakis
Expert Film Handler

Posts: 242
From: Ag.Paraskevi, ATHENS, GREECE
Registered: Sep 1999


 - posted 10-16-2007 11:05 AM      Profile for Christos Mitsakis   Email Christos Mitsakis   Send New Private Message       Edit/Delete Post 
Yes, the trim pot on cat515 controls the Right surround output.

Christos.

 |  IP: Logged

Bernie Anderson Jr
Master Film Handler

Posts: 435
From: Woodbridge, New Jersey
Registered: Apr 2000


 - posted 10-16-2007 02:28 PM      Profile for Bernie Anderson Jr   Author's Homepage   Email Bernie Anderson Jr   Send New Private Message       Edit/Delete Post 
Is it independant of the one on the 511 board?

 |  IP: Logged

Pete Naples
Phenomenal Film Handler

Posts: 1565
From: Dunfermline, Scotland
Registered: Feb 2001


 - posted 10-16-2007 04:29 PM      Profile for Pete Naples   Email Pete Naples   Send New Private Message       Edit/Delete Post 
Yes, it is.

If you've got a level discrepancy, amplifier and speaker issued aside, look at the output level attenuator jumpers on the rear panel, above each output terminal.

 |  IP: Logged

Bernie Anderson Jr
Master Film Handler

Posts: 435
From: Woodbridge, New Jersey
Registered: Apr 2000


 - posted 10-17-2007 10:19 AM      Profile for Bernie Anderson Jr   Author's Homepage   Email Bernie Anderson Jr   Send New Private Message       Edit/Delete Post 
thanks, I'll take a look at it later.

Bernie

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.