my profile | my password | search | faq & rules | forum home

» Film-Tech Forum ARCHIVE   » Operations   » Film Handlers' Forum   » f/number, focal length, throw, image size ?

Author Topic: f/number, focal length, throw, image size ? Iben Jimenez Film Handler Posts: 27 From: Cayey, PR, US Registered: Mar 2006 posted 04-24-2006 06:44 PM                     I just want a simple explanation of these terms: f/number, focal length, throw, image size. Why the short focal length lens can provide a bigger image? Thanks  |  IP: Logged Larry Myers Master Film Handler Posts: 371 From: Herndon, VA, USA Registered: Jan 2001 posted 04-24-2006 07:12 PM                 1. f-stop= ratio of lens diameter to focal length 2. Focal Length= distance from the lens to the film when focused at infinity 3. Throw= distance from the film to the screen. 4. Image Size= magnification factor times the film size.  |  IP: Logged Dave Macaulay Film God Posts: 2321 From: Toronto, Canada Registered: Apr 2001 posted 04-25-2006 12:19 AM                     The focal length is just the distance a pinhole "lens" would be from the film to give the same image size. The image size is bigger with a shorter focal length because of simple geometry: as the pinhole gets closer to the film, the approach and exit angles get larger. There isn't any way to find the focal length of a real projection (or camera) lens except by reading the markings or doing a projection test, the "pinhole" point is inside the lens's optical system somewhere and each lens design locates it differently. F-number is the ratio of focal length to entrance pupil (f-number = focal length / pupil diameter). F-number describes the amount of light a lens lets through, basically. Exactly what the entrance pupil size is is tough to explain. It would exactly equal the diameter of a pinhole (since larger pinholes give poorer focus, a pinhole makes a bad real-world lens with either a really dark or really blurry image) but with glass lenses things get complicated. Generally the diameter of the rearmost element gives a good approximation of the entrance pupil. Throw, focal length, and image size are proportional. You can calculate one given the other two. If you make a scale drawing you can even measure the focal length; in plan, draw a line from the right screen image edge to the left film image edge and another line connecting the opposite sides. Where these lines cross is where you'd place a pinhole lens, the distance from the film plane to the crossing is the focal length.  |  IP: Logged Iben Jimenez Film Handler Posts: 27 From: Cayey, PR, US Registered: Mar 2006 posted 04-25-2006 08:26 AM                     Thanks Dave. But, the pinhole principle applies to projection lenses as well?  |  IP: Logged Larry Myers Master Film Handler Posts: 371 From: Herndon, VA, USA Registered: Jan 2001 posted 04-25-2006 09:35 AM                 The best way to tell exactly what focal length you have is to photograph stars. Star tables will tell you how far one star is from another. Measure the distance between two known stars on the film and do the calculation. My 50mm Nikon lens cames out to 50.6257mm. Pinhole images are very interesting. The pinhole size will be the resolution of the image. Good pinholes are not cheap and could run 1000's of dollars for a low micron a high quality gold scientific pinhole. In an example, a $400 dollar 500 micron pinhole (1/2 millmeter or 1/2 millmeter resolution) will give a 2 line per millmeter image at 16 inches of focal length at f-812 with 660mm of depth of focus. It is best to use a 16 inch round drum as a camera with 16x20 inch reversal color paper. Exposure will be about 2 minutes in noon summer sun. The 16x20 image will look very good when viewed at about 3 feet away. [ 04-25-2006, 01:31 PM: Message edited by: Larry Myers ]  |  IP: Logged Dave Macaulay Film God Posts: 2321 From: Toronto, Canada Registered: Apr 2001 posted 04-25-2006 09:41 PM                     Yes, a lens is a lens, projection lenses do exactly the same job as camera lenses. They are obviously built differently because they do very different jobs; for example projection lenses don't have f-stop irises and camera lenses aren't made to take the heat of projection lamps. A pinhole makes an interesting camera lens if you have a motionless subject - as Larry says exposure time gets very long with a pinhole size that gives a decent image focus. For projection, pinhole lenses are useless... but the principle applies in theory.  |  IP: Logged Michael Schaffer "Where is the Boardwalk Hotel?" Posts: 4143 From: Boston, MA Registered: Apr 2002 posted 04-26-2006 04:51 AM                        quote: Dave Macaulay projection lenses don't have f-stop irises Schneider make some. quote: Dave Macaulay Exactly what the entrance pupil size is is tough to explain. It would exactly equal the diameter of a pinhole (since larger pinholes give poorer focus, a pinhole makes a bad real-world lens with either a really dark or really blurry image) but with glass lenses things get complicated. Could you elaborate on that some more?  |  IP: Logged Iben Jimenez Film Handler Posts: 27 From: Cayey, PR, US Registered: Mar 2006 posted 04-26-2006 08:24 AM                     Well, I understand that the focal length in a photographic camera is the distance between the intersection of the rays of light to the film plane or photographic film. For a single lens, the focal point would be the center of the lens itself and the geometry is like an "x" with the lens in the center or intersection and the two images at the sides. For a multiple lens system, the focal point may be in some part between the lenses. But my question in terms of the projection lenses is: What are the two points of reference of the focal length? The distance from the film to the focal point or the distance from the back of the lens to the focal point? Thanks IJ  |  IP: Logged Larry Myers Master Film Handler Posts: 371 From: Herndon, VA, USA Registered: Jan 2001 posted 04-26-2006 08:54 AM                 I believe the throw distance is from the film to the screen. If your back 50 ft and you measure from the lens to the screen, this is not a big factor as your just 2% or about 1 foot off at 50 feet. At 10 ft throw, this can be a big factor as you are now 10% off.  |  IP: Logged

All times are Central (GMT -6:00)

Printer-friendly view of this topic

Hop To: Select a Forum: Category: Operations -------------------- Digital Cinema Forum Film Handlers' Forum Large Format Forum Ground Level Feature Info, Trailer Attachments & REAL Credit Offsets Category: Community -------------------- Film-Yak Film Handlers' Movie Reviews The Afterlife Bob Maar's Joke-A-Thon Category: Classified -------------------- Equipment and Supplies Wanted/For Sale Help Wanted/Seeking Employment Category: System -------------------- Software Beta Testing Forum

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.