Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Film Handlers' Forum   » Lumens of lignt need for home theater

   
Author Topic: Lumens of lignt need for home theater
Jack Culpepper
Film Handler

Posts: 18
From: Gulfport, MS, USA
Registered: Jan 2001


 - posted 08-06-2001 10:58 AM      Profile for Jack Culpepper   Email Jack Culpepper   Send New Private Message       Edit/Delete Post 
Information concerning this would be appreciated. How many lumens of light would be needed from a digital projector with a dvd source to give an acceptable screen image of 5.5ft. x 12ft with a 25 to 30 ft. throw. Also, what type of other projector requirements, if any, would be needed to give an acceptable image. Any and all/other info would be appreciated.

 |  IP: Logged

Perry Sun
Film Handler

Posts: 11
From: Temecula, CA, USA
Registered: Mar 2000


 - posted 08-06-2001 12:00 PM      Profile for Perry Sun   Author's Homepage   Email Perry Sun   Send New Private Message       Edit/Delete Post 
Jack,

You're much more likely to get the answer you need by going to the AVS Forum at www.avsforum.com which has very lively discussions on home theatre projection issues.

Perry


 |  IP: Logged

John Pytlak
Film God

Posts: 9987
From: Rochester, NY 14650-1922
Registered: Jan 2000


 - posted 08-06-2001 12:21 PM      Profile for John Pytlak   Author's Homepage   Email John Pytlak   Send New Private Message       Edit/Delete Post 
If you have a matte white screen with a gain of 1.0, the number of lumens needed to light a 5.5 x 12 foot screen to 16 footlamberts is theoretically:

(16 x 5.5 x 12) / 1.0 = 1056 lumens.

However, this assumes the rated lumen output of your projector was for the 2.18:1 aspect ratio of your screen, and included factors such as light loss in the optics. The rated output is measured under optimal conditions, and may not take lamp aging, misalignment, etc. into account. Note that the "throw" distance has nothing to do with the light required, unless it requires a less efficient lens.

A gain screen would reduce the total light required, but would be more directional and should be properly curved for proper light distribution to the audience.

------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Eastman Kodak Company
Research Labs, Building 69, Room 7419
Rochester, New York, 14650-1922 USA
Tel: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion


 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.